Midterm Part One!
For my midterm, I'll be making the Two-Headed Monster circuit shown in class, with some soft circuits.
Diagrams
![Image of circuit generated using Fritzing.](https://dtosca.github.io/audiohardware/assets/midterm_part1/Schematic_Image.png)
![Image of circuit as a schematic.](https://dtosca.github.io/audiohardware/assets/midterm_part1/Schematic_Midterm.png)
Build of Materials
Device Sketch
I'm planning on purchasing this enclosure from Amazon, and drilling the necessary holes into it:
![Picture of an enclosure that is see-through at the top.](https://dtosca.github.io/audiohardware/assets/midterm_part1/enclosure.jpg)
Here's a sketch of my 🌟Vision🌟 for the project:
![Sketch of enclosure.](https://dtosca.github.io/audiohardware/assets/midterm_part1/sketch.jpg)